Furry Leopard Letters
Chenille letters in in a warm, furry leopard print. Rich tan, brown and black leopard print is accented with tan stitching over a black glitter background. Our furry leopard letters have heat activated iron on backing.
Size: 3 1/8" high (approx)
You can use E-6000 or double stick tape to put these letters on materials that are not good for a heat press or iron.
Pressing: 305 for 20 seconds. Medium pressure. If they want to lift, give just a little more pressure. Too much and you will crush the fluff.
Application Instructions
DTF Instructions
1. Pre-press if you need to remove wrinkles.
2. Press at 300° for 10 seconds. Heavy pressure.
3. Peel instantly!
4. Cover with teflon, spare shirt or parchment and press for 5 seconds.
Ensure no seams get in the press as it can cause a loss of pressure and the transfer may not adhere properly.
UV DTF Instructions
1. Wipe item with alcohol. Let dry.
2. Peel carrier from backing.
3. Apply decal to item.
4. Rub decal firmly (aka burnish).
5. Peel off carrier carefully. Press any lifting design again with extra firm pressure.